GRAPHTEC FC8600series

GRAPHTEC FC8600series

 GRAPHTEC FC8600seriesMesin Cutting Plotter GRAPHTEC FC8600series Produktivitas High Performa, FC8600series  memiliki kecepatan pemotongan maksimum 58,5 in / sec,Tekanan 20 sampai 600g, memungkinkan pengguna untuk memotong diamond grade, film reflektif intensitas tinggi, sandblast, jendela otomotif & kaca film, perekat vinyl, Amberlith ™ dan Rubylith ™, Self-adhesive vinyl film, diamond grade(1), fluorescent film, reflective film, Amberlith™, Rubylith™,sandblast resist rubber, high-intensity reflective film(1), window tint film, paint protection film,automotive paint protection film, dan media lainnya.

LCD Kontrol Panel 3 inch yg user-friendly, fungsi konfigurasi dual (mengatur dan menyimpan ) , termasuk kemampuan Ethernet ( menjalankan beberapa mesin dari satu lokasi ) ,dgan  push rol tambahan 3 dan  Generasi sistem ARMS baru ( secara otomatis mendeteksi tanda registrasi marks ). sistem ARMS generasi Graphtec menyesuaikan untuk beberapa jenis distorsi cetak potensial, yang memungkinkan untuk memotong kontur yang akurat gambar pra-cetak dan decals

Tekanan Adjustable roller, auto panel, Sensor yg dapat diandalkan, dan emulasi tangensial membuat mesin ini yang terbaik di kelasnya.

 fc8600 l1 GRAPHTEC FC8600series

 Spesifikasi Tekhnis :

– Emulation Tangensial – Blades dan reposisi saat memotong.

– Paneling otomatis –  meningkatkan akurasi dan pelacakan.

– Perforasi Cutting – Potong garis pemisahan untuk label, lipat garis tanda-tanda POP, dan banyak lagi.

– Expanded Cutting area – Termasuk daerah di luar tanda pendaftaran, mengurangi limbah material.

– Scan Mode – Memperluas jangkauan pemotongan,  meningkatkan mark scanning.

– 4-Point Axis Alignment – Peningkatan akurasi pendaftaran dan kualitas.

– Software Termasuk: Graphtec Studio, Cutting Guru 3 plug-in  Adobe ® Illustrator ® dan CorelDRAW ®

– Adjustable mendorong tekanan rol, secara otomatis beralih antara pemotongan dan mengatur sesuai kebutuhan.

 

Includes Graphtec FC8600-Series  :

Stands ( Media roll rack – Media catch basket)

DVD-Rom : Graphtec Studio standalone software, User manual(PDF Format), windows driver, Cutting Master 3 plug-in software for Adobe Illustrator and CorelDraw

Cutting Blade Holder

Cutting blade (Baja – CB09UB)

Fiber-tip pen Holder

USB Cable : for USB2.0, 2,9m panjang

Power Cord

BookManual:Quickstart&Safetyguide
GARANSICard:Sparepart1tahunpertama(kecualipartpemakaian),ServiceFree

 

Specifications: FC8600 – 60

• Configuration: Digital Servo drive, friction feed with grit roller
• Maximum cutting area: 610mm x 50m.
• Cutting area of guaranteed accuracy: 590mm x 15m
• Mountable media: Min -50mm; Max- 770mm
• Maximum cross cut area: 734mm
• Number of push rollers: 2
• Maximum Cutting speed: 1485mm/ second at 45 direction
• Axial acceleration: Max.39.2m/ s( 4G) in 8 steps
• Cutting force: 600gf in 48 steps
• Mechanical resolution: .0055mm
• Programmable resolution: GP-GL 0.1/ 0.05/ 0.025/ 0.01, HP-GL 0.025
• Distance accuracy: Max.0.1mm or 0.1% of plotted length
• Repeatability: Maximum 0.1mm in plot up to 2m
• Minimum character size: approximately 3mm
• Blade type: Supersteel ( 0.99mm or 1.5mm diameter)
• Pen type: water-based fiber-tip and oil-based ballpoint pens
• Media type: self adhesive marking vinyl up to .25mm thick, polyester film up to .25mm thick, sandblast resist rubber up to 1mm thick, regular paper from .06mm to .13mm rhick
• Light pointer: built into the tool carriage
• Cross cutter: built into the tool carriage
• Perforation cut: supported ( performed by force control)
• Interface: USB 2.0 ( full speed) , RS-232C, Ethernet
• Buffer memory size: 2MB
• Registration mark sensing system: scans the mark by optical sensor ( ARMS5.0) , segment area and multiple marks compensation, 4-points axis alignment, auto mark detect
• Display: Graphic type LCD ( 3 ” size with backlight)
• Power source: 100 V to 240 V AC, 50/ 60 Hz
• Power consumption: Maximum 160VA
• Dimensions ( WxDxH) ( including stand) : 1128 x 715 x 1219mm
• Weight ( including stand) : 38kg
• Included software: windows driver, plotter controller, Graphtec Studio, Cutting Master 3
• Compatible OS: Windows 8, Windows 7, Windows Vista, Windows XP, Mac OS X

 

 

  1. Specifications: FC8600 – 130
  • Configuration: Digital Servo drive, friction feed with grit roller
  • Maximum cutting area: 1372mm x 50m
  • Cutting area of guaranteed accuracy: 1342mm x 10m
  • Mountable media: Min.50mm, Max.1529mm
  • Maximum cross cut area: 1496mm
  • Number of push rollers: 3 rollers
  • Maximum Cutting speed: 1485mm/s at 45° direction
  • Axial acceleration: Max.39.2m/s² 4G in 8 steps
  • Cutting force: Max.5.88N 600gf in 48 steps
  • Mechanical resolution: 0.005mm
  • Programmable resolution: GP-GL 0.1/0.05/0.025/0.01mm, HP-GL 0.025mm
  • Distance accuracy: Max 0.1mm or 0.1% of plotted length
  • Repeatability: Max 0.1mm in plot up to 2m
  • Minimum character size: approximately 3mm alphaneumeric
  • Blade type: Supersteel (0.99mm or 1.5mm diameter)
  • Pen type: water-based fiber-tip and oil-based ballpoint pens
  • Media type: self adhesive marking vinyl up to .25mm thick, polyester film up to .25mm thick, sandblast resist rubber up to 1mm thick, regular paper from .06mm to .13mm rhick
  • Light pointer: built into the tool carriage
  • Cross cutter: built into the tool carriage
  • Perforation cut: supported (performed by force control)
  • Interface: USB 2.0 (full speed), RS-232C, Ethernet
  • Buffer memory size: 2MB
  • Registration mark sensing system: scans the mark by optical sensor (ARMS5.0), segment area and multiple marks compensation, 4-points axis alignment, auto mark detect
  • Display: Graphic type LCD (3″ size with backlight)
  • Power source: 100 V to 240 V AC, 50/60 Hz
  • Power consumption: Maximum 160VA
  • Dimensions (WxDxH)(including stand): 1878mm x 715mm x 1219mm
  • Weight (including stand): 54kg
  • Included software: windows driver, plotter controller, Graphtec Studio, Cutting Master 3

·  Compatible Operating Systems: Windows 8, Windows 7, Windows